A Hearthstone company - serving Easton, PA

Olympia Chimney Crown Repair Nationwide

Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Styles & brands we work with

Sweep & inspection

Caps & crowns
Caps & crowns
Flue relining
Flue relining
Masonry repair
Masonry repair
Gas fireplace service
Gas fireplace service

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Olympia Chimney Crown Repair: The Easton Owner’s Guide

Olympia Chimney crown repair in Easton typically runs $450-$850 installed, depending on whether we’re sealing hairline cracks or pouring a new concrete crown. We stock Olympia Chimney-compatible crown sealants and forms on our trucks, and most Easton jobs are completed in a single visit. Homeowners usually spot trouble after heavy rain: water pooling on the crown surface, dark streaks down the chimney face, or bits of concrete in the yard after a freeze-thaw cycle. Russell Haines and our crew have replaced dozens of these on colonials near the Delaware Canal where the crown was never built with the proper slope to shed water.

Call (610) 756-1504

Which Olympia Chimney Models This Applies To

Olympia Chimney crowns are found across their stainless steel liner systems and masonry chimney product lines, but the crown itself is the poured concrete cap at the top of your chimney, not a metal component. The critical match is crown dimensions: inside lip height, overhang beyond the flue tile, and slope angle. Most Easton homes built between 1960 and 1995 have crowns measuring 24 to 36 inches square with a 2-inch minimum overhang. We verify this with a camera inspection before quoting.

The OEM approach from Olympia Chimney specifies a 4,000 PSI concrete mix with integral waterproofing. We use that spec, or a compatible professional-grade pour from Copperfield when the original form is salvageable. The gotcha: some Olympia Chimney systems have a chase cover that sits below the crown, and if that cover has rusted through, replacing the crown alone traps moisture. We check both. Hearthstone Chimney Co. is an independent service provider, not affiliated with Olympia Chimney.

Signs Your Olympia Chimney Crown Repair Is Failing

  • Hairline cracks spreading across the surface. These start small after the first few Easton winters, then widen as water freezes and expands. Once cracks reach 1/8 inch, water reaches the brick below and the damage accelerates.
  • Concrete chunks or sand collecting at the chimney base. This means the crown surface is spalling, usually from a mix that lacked air entrainment for freeze-thaw cycles. PA’s 20 to 30 annual freeze-thaw events chew up weak concrete fast.
  • Water stains on the ceiling near the chimney breast. A cracked crown lets water run down the flue liner or between the liner and brick. By the time you see interior stains, the crown has been leaking for one or two seasons.
  • The crown sits flat or bowls inward. Proper crowns slope at least 3/8 inch per foot to shed water. Flat crowns pool water, and in Easton’s spring rains, that standing water finds every crack.
  • Gaps between the crown edge and the brick chimney. This separation means the crown is separating from the structure, often from rusted crown anchor bolts or inadequate bond when originally poured. Left alone, the crown can shift and crack the flue tile below.

Replacement Cost & What’s Included

Repair Type Typical Range in Easton What’s Included
Crown sealing (hairline cracks) $450-$650 Surface prep, flexible crown coat application, 5-year material warranty
Partial crown rebuild (spalling, minor separation) $650-$850 Form and pour new crown section, integrate with existing, camera inspection
Full crown replacement with chase cover inspection $850-$1,400 Remove old crown, inspect flue tile and chase cover, form and pour new 4,000 PSI crown with proper slope

What drives the range: crown size, accessibility (steep roof pitch adds time), and whether the flue tile or chase cover needs attention at the same time. We price upfront after inspection, not after we’re on the roof. The number on the estimate is the number on the invoice. Every crown repair carries our 90-Day Done Right Promise in writing, no arguing.

DIY or Call Us?

You can safely check your crown from the ground with binoculars: look for cracks, missing chunks, or standing water after rain. You can also run a hose on the roof near the chimney (not directly on the crown) and check for new interior leaks.

What you should not do: climb onto the roof to patch the crown yourself. The concrete work requires forms, proper slope, and a cure time that won’t wash out in the next rain. More importantly, chimney crowns sit at height, on a surface that may already be structurally compromised. We’ve seen homeowners step through a rotted chase cover they didn’t know was there. The repair itself isn’t high-tension dangerous, but the access is. Call us at (610) 756-1504. We’ll photograph what we find, explain it plain English, and let you decide.

FAQs

Need Chimney Cleaning help in Easton? Licensed & insured · Written inspection reports response · free estimates
Call (610) 756-1504
Local Service Coverage

Request a Free Estimate in Easton

Tell us what you need - Hearthstone Chimney Co. responds fast. No obligation.

By submitting this form, you agree to the terms of our Privacy Policy and agree to be contacted through phone, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Text Now
Call Now - 24/7 Dispatch