Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Liner & Rebuild Across Wind Gap
Chimney liner and rebuild work in Wind Gap typically runs $1,800-$4,500 for liner replacement and $3,500-$8,500 for partial or full rebuilds, with most inspections scheduled within a few days and completed in a single visit. If your chimney is leaking, drafting poorly, or showing ceiling stains after wind-driven rain, a Level-2 camera inspection will show exactly what needs attention and what can wait. Call (610) 756-1504 - a live person answers, 24 hours a day.
We’ve been driving Route 512 and Blue Mountain Drive to reach Wind Gap homes for decades. The borough’s late-19th and early-20th century housing stock - modest worker homes and vernacular doubles clustered near the original downtown - presents chimney problems we know by sight: unlined flues, wind-scoured mortar, and crowns cracked by freeze-thaw cycles accelerated by the mountain gap. Our technicians are background-checked, uniformed, and carry the professional-grade materials to complete most liner and rebuild jobs in one trip. Scheduling is coordinated from our Philadelphia office, but our crews live and work in Northampton County. We’ll be there when we say.
Why Hearthstone Chimney Co. Is Wind Gap’s Preferred Chimney Liner & Rebuild Company
Homeowners in Wind Gap call us because we’ve been answering the phone with a live person for over 42 years, and we plan to be here in thirty more. That changes how you treat a customer. Our Chimney Liner & Rebuild team has worked on hundreds of chimneys in the borough and the surrounding Slate Belt - from the older homes near Broadway and Lehigh Street to the hillside properties catching the full force of northwest wind off Blue Mountain.
Our Level-2 camera inspections end with photos you can see and a plain-English verdict. No jargon, no scare tactics. If your liner has five years left, we’ll say so. If it’s cracked and venting carbon monoxide into the wall cavity, we’ll show you the picture and explain exactly what it means. Every job is backed by our 90-Day Done Right Promise - in writing, no arguing. If it’s not right, we come back. That’s the Keystone Standard, governed by our K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it.
Most Wind Gap appointments are scheduled within a few days, and our technicians arrive with DuraFlex, HeatShield, and Copperfield materials on the truck - no waiting for parts, no return trips for standard liner and rebuild work. A square deal: no surprises on the bill. The number on the estimate is the number on the invoice.
Our Chimney Liner & Rebuild Services in Wind Gap
Stainless Steel Liner Installation
A stainless steel liner is the right choice for most Wind Gap homeowners burning wood or converting to a modern insert. The borough’s older masonry chimneys were built without liners or with brittle clay tiles that crack under thermal shock. We install rigid and flexible stainless systems from DuraFlex, sized precisely to your appliance and venting configuration. In Wind Gap, we often pair stainless liners with wind-directional caps because the venturi effect through Blue Mountain can pull so hard on standard terminations. Done right - and we stand behind it.
Flexible Liner Installation
Flexible liners solve the offset and clearance problems common in Wind Gap’s tighter chimney flues. Many of the borough’s worker homes have narrow, shifting flue passages that won’t accept rigid pipe. Our flexible DuraFlex liners navigate those offsets while maintaining full UL listing for wood, pellet, and oil appliances. We see this most often in the older doubles and row-style homes near the original commercial core, where chimneys were built fast and not always straight. The flexible system drops in, connects solidly, and vents safely for decades.
Liner Replacement
When your existing liner is cracked, glazed with third-degree creosote, or simply too deteriorated to clean safely, replacement is the only option. In Wind Gap, we replace liners in homes that have burned wood or coal for generations - the original clay is often fractured by decades of thermal cycling and, in some cases, by chimney fires the owner never knew happened. Our process: camera inspection first, photo report, plain-English verdict, then a written estimate with no-hassle upfront pricing. Most liner replacements in Wind Gap are completed in a single day.
Partial Chimney Rebuild
Not every failing chimney needs to come down to the roofline. We rebuild from the roof up when the lower structure is sound but the crown, cap, and upper courses have failed. In Wind Gap, this is common after sustained northwest wind exposure has scoured mortar joints and cracked the crown beyond repair. We rebuild with matching brick where possible, pour a new concrete crown with proper overhang and drip edge, and install a cap rated for the local wind load. Photos before, during, and after - you see what we see.
Full Chimney Rebuild
When the entire structure is compromised - spalling brick through multiple courses, shifting foundation, or internal flue collapse - a full rebuild is the safe choice. We’ve completed full rebuilds on Wind Gap homes where the original chimney had simply reached the end of its service life after 100+ years of mountain weather. We handle permitting, build to current code, and install a proper liner system as part of the job. The result is a chimney that will outlast the next generation.
Liner Repair
Some clay-tile liners can be repaired rather than replaced. We use HeatShield cerfractory sealant for minor cracking and joint gaps, restoring a smooth, insulated flue surface without the cost of full replacement. This works when the damage is limited and the tiles are otherwise structurally sound. We’ll tell you honestly if your liner is a repair candidate or if replacement is the smarter long-term investment. No upsell. Just the thing done correctly.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Wind Gap
We work exclusively with professional-grade materials - no builder-grade substitutes that fail in five years. Our trucks carry DuraFlex flexible and rigid stainless liners, HeatShield cerfractory repair systems, and Copperfield chimney caps and accessories. For Wind Gap’s wind-exposed conditions, we stock directional and rotating caps rated for sustained directional loads that standard hardware-store models can’t handle. Because we carry inventory locally, most Wind Gap jobs need no parts order and no second trip. Fast turnaround matters when you’re waiting to use your heat.
Common Chimney Liner & Rebuild Problems We See in Wind Gap Homes
- Wind-scoured mortar joints and cracked crowns. The venturi acceleration through Blue Mountain’s notch drives sustained northwest wind against the windward face of Wind Gap chimneys. Mortar joints erode faster here than in sheltered towns like Nazareth, and concrete crowns crack from amplified freeze-thaw cycling. Water wicks behind the flashing and shows up as a ceiling stain before any smoke problem appears.
- Standard chimney caps displaced or destroyed by directional wind. Round fixed caps that work fine in Pen Argyl or Bath regularly fail in Wind Gap. The sustained directional load pulls them loose, bends the mesh, or tears the mounting flange. We replace them with wind-directional or 180-degree draft-inducing caps oriented to the prevailing NW flow - the fix that finally stops downdraft and smoke rollback.
- Original unlined or clay-tile flues in pre-midcentury homes. Wind Gap’s housing core was built for coal and early wood heat, often without any liner at all. Those original flues can’t handle modern appliance temperatures or draft requirements. Creosote accumulates rapidly, and a chimney fire risk develops that the owner can’t see from the living room.
- Flashing failures after wind-driven rain events. The combination of accelerated wind and mountain-gap precipitation pushes water behind chimney flashings with more force than in valley-floor communities. We find lifted step flashing, deteriorated counterflashing, and rotted roof decking that the homeowner discovers only when the ceiling stain appears below.
Pricing for Chimney Liner & Rebuild in Wind Gap, PA
Honest numbers for the local market:
| Service | Typical Range in Wind Gap |
|---|---|
| Level-2 camera inspection with photo report | $250-$350 |
| Flexible stainless liner (standard flue) | $1,800-$2,800 |
| Rigid stainless liner (straight flue) | $2,200-$3,400 |
| Liner replacement with demolition | $2,800-$4,500 |
| Partial rebuild (roof up) | $3,500-$6,500 |
| Full chimney rebuild | $6,500-$8,500+ |
| Crown repair or replacement | $800-$1,800 |
| Wind-directional cap with installation | $450-$750 |
What moves the number: flue height, number of appliances being vented, accessibility (steep roof pitches common on hillside Wind Gap properties add labor), and whether the existing liner must be extracted or has partially collapsed. We provide no-hassle upfront pricing - the estimate we write is the invoice you pay. Every repair over $250 qualifies for $50 off, and seniors and veterans receive a standing 5% discount. Estimates are free. Call (610) 756-1504 for an exact quote.
We Also Serve Cities Near Wind Gap
Our crews work throughout Northampton County and the Slate Belt. If you’re in Pen Argyl, Nazareth, Bath, or Easton, the same live-answer phone, same-day scheduling coordination, and same 90-Day Done Right Promise apply. Chimney Liner & Rebuild in Wind Gap is our focus, but we don’t stop at the borough line. Call (610) 756-1504 and we’ll get you on the schedule.
Serving Wind Gap, PA - Our Local Coverage Area
We’re based in the Wind Gap area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Liner & Rebuild in Wind Gap
Wind Gap sits in a literal wind gap - a notch eroded through Blue Mountain - that funnels and accelerates northwest winds directly through the borough. This venturi effect creates sustained directional pressure that standard fixed chimney caps cannot handle. The fix is a wind-directional or 180-degree draft-inducing cap oriented to that prevailing flow, which we install regularly for Wind Gap homeowners. Call (610) 756-1504 for an inspection - estimates are free.
Check for new ceiling stains on the wall below the chimney chase, debris or mortar granules in the firebox, or visible cracks and missing chunks on the crown itself from ground level with binoculars. In Wind Gap, wind-driven rain against the windward face often pulls flashing away before the crown shows obvious damage. We recommend a camera inspection after any significant storm - photos you can see, a plain-English verdict. Call (610) 756-1504 to schedule.
No. Unlined flues and deteriorated clay tile are not rated for modern wood-burning temperatures and cannot contain a chimney fire if one starts. In Wind Gap’s older housing stock, we find heavy second-degree and third-degree creosote buildup in these original flues, often with hidden tile fractures that vent combustion gases into wall cavities. A stainless or flexible liner installation is the safe path forward. Call (610) 756-1504 for a Level-2 inspection and written estimate.
Wind-scoured mortar is caused by sustained directional wind carrying abrasive particulate against the windward face, combined with accelerated freeze-thaw cycling from the mountain-gap cold exposure. In Wind Gap, this affects the northwest face first and worst. The mortar erodes, water infiltrates, and the cycle accelerates. Repointing and crown repair stop the damage; a wind-rated cap prevents recurrence. Call (610) 756-1504 for an exact assessment.
Yes. Creosote accumulates even from occasional fires, and in Wind Gap’s older unlined flues, the risk isn’t proportional to usage. More critically, wind and water damage to crowns, caps, and flashing happens regardless of how often you burn - and that damage often shows up as a structural or leak problem before it affects draft. Our $89 Seasonal Tune-Up includes inspection, cleaning, and a condition report. Call (610) 756-1504 to book.
We were called to a late-1800s worker home near the borough core after the owner noticed a ceiling stain below the roofline every time northwest wind drove rain against that wall. Our tech found the flashing pulled away from the masonry, a hairline-cracked crown, and a displaced cap, plus spalling mortar joints that had been wind-scoured for years - underneath it all sat an unlined flue with heavy second-degree creosote. We rebuilt the crown, reset the flashing, installed a wind-directional cap oriented to the prevailing NW flow, and dropped in a stainless flexible flue liner from DuraFlex so the wood stove could be run safely again.
That’s the work we do in Wind Gap. No shortcuts, no scare tactics, just the thing done correctly and documented so you can see it for yourself. If your chimney is showing signs of wind damage, water intrusion, or draft problems, call (610) 756-1504 now. A live person will answer, 24 hours a day, and we’ll get you scheduled for a free estimate.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Wind Gap and Northampton County since 1984.